101D Water Level DrawDown Meter
- Different tape lengths available
- Tape lengths up to 5000ft (1500m) available
- Easy to switch between modes
- One convenient toggle makes it easy to switch between two functions
- Replacement tapes are interchangeable with other Meters
Overview
Specifications
Accessories
Related Products
|
|
The 101D Water Level DrawDown Meter uses a corrosion resistant stainless steel probe connected to clearly marked flat tape, fitted on a well-designed reel. It is powered by a standard 9 volt battery. In water level mode, when the zero point on the probe enters water, an electronic circuit is completed, activating the buzzer and light. The depth to water is then read off the tape. In drawdown mode, the circuit is reversed—the buzzer and light are triggered when the probe is in air. The battery test button can check the circuit in both water level and drawdown modes. The on/off sensitivity control allows the buzzer to be turned down in cascading water and ensures a clear signal in high and low conductivity conditions. Water Level DrawDown ProbeThe 101D uses the same probe as the 101 P7 Water Level Meter, which is submersible up to 1000 ft. (300 m). The sensor at the tip of the probe provides consistent measurements with almost zero displacement. A protective shroud is included on the probe. The tape seal plug design allows the probe to be quickly and easily replaced if required. An optional carry case is available to purchase separately. Manufactured by: Solinst Model: 101D Water Level DrawDown Meter Services offered for this product
Applications
|