Menu
Home > Moisture & Gas Analysers > Oxygen and Gas Analysers > TMO2D Display and Control Module

TMO2D Display and Control Module

Product Options

Overview

The TMO2D is an optional display and control module that enhances the performance and operation of transmitters such as the XMO2, XMTC or OXY.IQ. It provides a two-line x 24-character backlit LCD display, display and option programming via keyboard, recorder outputs, alarm relays, and relays for driving sample system solenoids for automatic zero and span calibration, as well as a 24 VDC power supply for the transmitter.

Manufactured by: Panametrics
Model: TMO2D Display and Control Module

Services offered for this product

  • Sales
  • Rental
  • Installation
  • Calibration
  • Maintenance
  • IoT Cloud Compatible

Specification

Performance
System accuracy Refer to transmitter specifications
Electronics display and output accuracy ±0.1% of span
Ambient temperature effect ±0.05% of full scale per °F (°C)
Functional
Analog output
  • Standard: Single, isolated 0/4 to 20 mA, 500 Ω maximum, 12-bit resolution, field programmable
  • Optional: Dual, isolated 0/4 to 20 mA, 500 Ω maximum, 12- bit resolution, field programmable
Alarms
  • Standard: Two form C, SPDT, 2 A maximum @ 115 VAC, field programmable, 0.01% set-point resolution, 0.05% of span dead band
  • Optional: Two hermetically sealed relays for class I, division 2 hazardous (classified) locations
  • Two standard or hermetically sealed relays for automatic calibration (auto cal)
Digital output RS232C serial port
Display Two-line x 24-character backlit LCD
Analog input
  • One 4 to 20 mA input from any transmitter
  • Optional second 4 to 20 mA input from TMO2 transmitter
Power 100/115/220/240 VAC ±10%, 50/60 Hz, 35 W maximum provides 24 VDC, 1 A maximum to transmitter
Temperature
  • Operating: 32°F to 122°F (0°C to 50°C)
  • Storage: –4°F to 158°F (–20°C to 70°C)
Physical
Dimensions
  • Rack mount: 5.25 in x 19 in x 9.25 in (133 mm x 483 mm x 235 mm)
  • Bench mount: 5.25 in x 9 in x 9.25 in (133 mm x 229 mm x 235 mm)
  • Panel mount: 5.25 in x 9 in x 9.25 in (133 mm x 229 mm x 235 mm)
Weight
  • Rack mount: 5.4 lb (2.4 kg)
  • Bench mount: 7.4 lb (3.4 kg)
  • Panel mount: 4.7 lb (2.1 kg)
Environmental
  • General-purpose: rack, bench, panel
  • Non-incendive: rack, panel; FM/CSA class I, division 2, groups A, B, C and D
European compliance Complies with EMC directive 2014/30/EU, LV directive (overvoltage category II , pollution degree 2 )2014/35/EU

Related products

oxy.IQ Oxygen Transmitter

oxy.IQ Oxygen Transmitter

oxy.IQ Oxygen Transmitter from Panametrics is a reliable and cost effective 2-wire loop-powered transmitter that can measure oxygen in ten ppm ranges and seven percentage ranges.
Panametrics XMO2 Smart Oxygen Analyser

Panametrics XMO2 Smart Oxygen Analyser

The XMO2 thermoparamagnetic oxygen transmitter from Panametrics provides state-of-the-art oxygen measurement. It is the most stable oxygen analyser currently available on the market.
XMTC Thermal Conductivity Binary Gas Transmitter

XMTC Thermal Conductivity Binary Gas Transmitter

The XMTC is a compact, reliable, and field-proven thermal conductivity analyser for safety and measurement applications. Certified for hazardous area environments, the XMTC is a cost effective analyser in a compact transmitter design for percent measurement of one gas in another.
XDP Panametrics Explosion-proof Display

XDP Panametrics Explosion-proof Display

The XDP explosion-proof display provides the measurement of percent or ppm oxygen or hydrogen gas. The explosion-proof XDP is certified for use in Class 1, Division 1, Groups B, C and D as well as Zone 1 ATEX/IECEX Ex d IIC T6 Gb hazardous areas.
© RS Hydro 2025. All rights reserved. E&OE excepted.