DewPro MMR30 Moisture Transmitter
Product Options
Overview
The DewPro MMR30 is a compact, mid-range moisture transmitter designed specifically for refrigeration dryer manufacturers and users. The DewPro MMR30 measures dew point at line pressure or atmospheric pressure and installs easily on a dryer outlet header.
The DewPro MMR30 uses a proven polymer capacitive sensor to provide a measurement range of 5°F to 185°F (-15°C to 85°C) with ±1.8°F (±1.0°C) accuracy. The optional integrated display with user interface provides full programming and diagnostic capability.
Manufactured by: Panametrics
Model: DewPro MMR30 Moisture Transmitter
Services offered for this product
- Sales
- Rental
- Installation
- Calibration
- Maintenance
- IoT Cloud Compatible
Specification
| Sensing element | Silicon-based polymer, capacitance principle, IC electronics |
| Dew point range | 5°F to 185°F (-15°C to 85°C) |
| Dew point accuracy | ±1.8°F (±1°C) above 32°F (0°C) dew point @ 25°C |
| Operating temperature range |
|
| Maximum operating pressure | 250 psia (17 bar) Inlet filter: 2 micron sintered stainless steel |
| Air bleed off at 100 psig (7 bar) | Approximately 1 SCHF (28 sl/h) |
| Output | Loop current 4 to 20 mA; 16 :A resolution |
| Flow block | 316 stainless steel with 1/2 in NPT-M or G 1/2 thread; (DIN ISO 228) and gasket seal |
| Wrench width for flow block | 1-5/8 in (42 mm) |
| Electronics | Microcontroller operated |
| Hardware selectable units | Dew point temperature in °F or °C |
| Supply power | 24 VDC nominal, tolerance 12 to 30 VDC |
| Optional display | Four-digit numeric display with bar graph and matrix position indication. Four user interface keys for unit selections, output adjustments and ranging. |
| Protection | Type 4X/IP67 |
| Weight | 4.4 lb (2 kg) |
| European compliance | Complies with EMC Directive 89/336/EEC and PED 97/23/EC for DN<25 |